Bitbox 2.5 User’s Manual
7/17/19 11:13:00 AM
Copyright 1010music LLC 2019
Page 5 of 42
Digital Heart – Analog Soul
Welcome
Bitbox is a digital sampler designed for Eurorack. It allows you to record your own WAV files or bring them over from your
computer, trigger them via CV and MIDI, and manipulate them using slices and modulators. It provides the ability to perform
tasks on your Eurorack that previously required a computer. The module’s touch screen makes working with WAV files easy
and intuitive.
In this manual, we will start with an overview of the front panel and the main screen. Next, we will cover how to install the
module in your rack and do initial setup of the firmware options. Once the module it set up, we will describe how to create a
preset and configure cells. This will include a discussion of the different cell modes, and how to record a new WAV file. Next,
we will go into more depth about preset management tasks. That will be followed by a discussion of how to use modulators,
tracks and clock signals to synchronize playback across cells and with external devices. After that, we will cover how to backup
your presets and WAV files, and upgrade or swap your firmware.
If you would rather get a quick overview of how to use the module, see the Bitbox Quick Start Guide that came with the
module and that is also available online at
https://1010music.com/bitbox-documentation
.
This document applies to version 2.5 of the bitbox firmware.
