Basic Wiring Diagram
To: Ground
To: Ign On Power
1. CF Card installation
Insert the CF card Face-up into the CF card slot of the DVR.
2. Audio output connection
Connect audio output to external speaker (Optional).
3. Video connection
Connect the monitor to Video output terminal.
4. Mode 1 or Mode 2 select switch
Mode 1
: 2~4 channels sequencing view & record.
Mode 2
:
Default
One channel real time recording. Under Mode 2, it can also work on
switching record in case the sensor wires are used.
5. Audio/Video Input Harness
Black leads are camers 1-4; Red leads are audio 1-2
6. Detecting wire (Sensor control) connection
If you select
Mode 2
, you can also connect the detecting wire for switching record.
Connect the detecting wire to this socket. Please refer to the following drawing as
for the connecting.
7. Power connection
a. Plug the power cord to Battery Power. Red-Posite/ Black to Ground.
(there is a 5 second delay when power is supplied before DVR will power on)
8. Turn on and use the DVR system
Switch the power switch to “ON”. The DVR is ready to be used.
9. RS-232 signal connection (optional)
