10-8 Video Digital Evidence Solutions 104CF-V3 User Manual Download Page 2

Page: 2 / 37

Caution!

You, as the driver, are solely responsible for the safe operation of your vehicle and the safety

of your passengers according to the US and local traffic regulations. . Do not use any features

of this system to the extent it distracts you from safe driving. Your first priority while driving

should always be the safe operation of your vehicle. 10-8 Video cannot accept any

responsibility whatsoever for accidents resulting from failure to observe these precautions or

safety instructions:

1. This product utilizes high voltage. Any unauthorized modifications or damage to the

products may result in electrical shock. Handle all components with care. Inspect

regularly for damage to components and cabling.

2. You shall be responsible to ensure that the installation of this product does not void

or affect the vehicle manufacturer’s warranty. 10-8 Video, or

its branches are not liable in full or in part for improper installation resulting in loss

or damage to your property, or for voiding all or part of the vehicle manufacturer’s

warranty.

3. Do not apply excessive force to any of the components contained within this kit.

Excessive force used before, during or after installation that results in a damaged or

non-functional part shall void all warranties.

4. Please follow the procedure from this installation manual. Improper installation or

modification of this product shall void all warranties.

Summary of Contents for 104CF-V3






































Search results

Summary of Contents for 104CF-V3

Reviews:

Related manuals for 104CF-V3

Brands by name

Popular brands

10-8 Video Digital Evidence Solutions 104CF-V3, User Manual

Search results

Summary of Contents for 104CF-V3

Reviews:

Related manuals for 104CF-V3

Brands by name

Popular brands