8
BEFORE OPERATION
(1) The system will auto detect the hardware and enter
Recording
mode while
hardware is in normal condition.
(2) The system will show [UNKNOW HDD] then enter [Format Menu] within 3 seconds
when a new unformatted CF card is inserted. Please select [FORMAT HDD YES]
to format the CF card. The system will auto enter record mode after the CF card
is formatted. (Or, enter the Main menu “record setup” and select HDD
information to format the CF card.)
(3) If the system time has not yet been set, the DVR will display the time setting screen,
please press [MENU](ESC) key to exit after setting the time.
(4) If [NO HD] signal shows on screen, please turn off the power then check that a CF
card is correctly inserted. If yes, please turn the power on again.
(5) If screen shows [NO VIDEO], please check video input connector is
connected correctly to the video camera.
(6) Camera should be on before turning on the DVR unit.
