| 3 - INSTALLING CT28 ON THE WALL BRACKET
Figure 16. Removing the M6 mounting bolts from
the top of CT28.
•
Using a 4 mm hex wrench or hex driver, remove the two M6
× 25 mm screws from the top rear of the enclosure, inside the
recess. Keep these, as they will be used to mount the bracket.
Figure 17. Removing the M6 bolts from the bottom
(connector end) of the CT28
•
Repeat the previous step on the bottom (connector end) rear
of the enclosure.
Summary of Contents for Contour CT28
Page 1: ...Contour CT28 Wall Ceiling Installation...
Page 50: ......
