1.
Range of supply and device application
Standard range of supply:
O2 measuring device type
OXI
- 1 pc
Connecting hoses lenght 1 m- 2 pcs
Rechargeable adapter 24 V DC/200 mA – 1 pc
Optional accesories:
DVD with SerialWatcher programme to display the measured data in PC- 1pc
cable RS485/USB FTDI USB-RS485-WE-1800-BT for connection to PC - 1 pc
USB-RS485 ModBus Converter- 1 pc
Sampler ICAS1 – for glass bottles and adapter ICAS1- for plastic bottles.
Sampler ICAS2-for sampling of hopped wort from fermenting tank
Adapter for easi and reliable connection of oximeter to the sampling point on the piping (technology)
Reduction for hoses with different diameters
OXI holder
Note: accessories is not part of the supply - only on customer’s demand
Measuring device for measurement of O2 content in beverages and gases especially in beer, soft drinks and wine.
Check the possibility for O2 measurement in other beverages and gases with manfacturer.
It is portable device that can be firmly built-in with the help of the supplied holder.
It is equipped with the internal memory with capacity of 450 measured values. Measured values can be transferred
into PC with the help of RS485/USB adapter and then exported to Excell for further processing. Measurement period
can be easily adjusted.
Note:
Adapted only for industrial application
2. Installation - putting the device into operation
2.1 TAKING OF SAMPLES:
The device is ready for measurement at the moment of delivery.
Before the measurement connect the device by fixing of inlet hose with the connection (4) on oximeter (see pic.2) to
the sampling point. In case it is not possible to connect the inlet hose to the sampling point please use the
corresponding reduction – attach the corresponding hose to the reduction to take safely the sample. The inlet hose
(3) must be secured at the sampling point not to fall out during taking of sample.
Connect the reduction (1) with the help of the outlet hose (5) and place it to the drain. Hold the device in a horizontal
position during filling the measuring chamber (see pic.2) – connection (1) is oriented up. Measured liquid goes
through the inlet hoses into the measuring chamber (3) where O2 content is measured with measuring electrode (5).
Then the measured liquid goes out of the chamber through the outlet hose. Adjust the flow rate by control valve (2)
in the way to avoid bubles creation.
2.2 CLEANING OF THE DEVICE:
Connect the device by fixing of inlet hose with the connection (4) on oximeter (see pic.2) to the water cock. In case
it is not possible to connect the inlet hose to the water cock please use the corresponding reduction – attach the
corresponding hose to the reduction. The inlet hose on the water cock (3) must be secured not to fall out during
rinsing. Place the outlet hose into the drain and open the control valve (2). Wash water goes through inlet hose to
the measuring chamber (3) and then it goes out of the chamber through the outlet hose to the drain. Once the
cleaning is over switch off the water cock. Disconnect the device from the water cock and let the water go out from
the measuring chamber.
Clean the external surface with soft flannel moistened with water. After this handling the device is ready for next
measurement.
.
