158 | NIC Status Lights for xx60, xx55, and xx50 Appliances
NICs for Series xx50 platforms
The interface names for the NICs in the SteelHead Management Console and the CLI are a combination
of the slot number and the port pairs (lan<slot>_<pair>, wan<slot>_<pair>). For example, if a four-port
NIC is located in slot 1 of your system, the interface names are lan1_0, wan1_0, lan1_1, and wan1_1
respectively.
Note:
In a 1U appliance the LAN and WAN ports are numbered in ascending order (such as 0, 1, 2, etc.) from left to
right.
Figure C-20. Series xx50 appliance with a Four-Port SX Multimode Fiber GbE PCIe card in slot 1
Note:
In a 3U appliance the LAN and WAN ports are numbered in ascending order (such as 0, 1, 2) from bottom to
top.
Figure C-21. 3U Series xx50 appliance with a Four-Port SX Multimode Fiber GbE PCIe card in slot 1
The following table describes the Four-Port SX Multimode Fiber GbE PCIe card status and LED lights.
LED
Condition
Link / Act
Solid green on link, blinks on activity.
Bypass/Fail-to-Block (disconnect)
Solid green in bypass mode. Solid yellow in
disconnect mode.