Network Card Status Lights for SteelHead and SteelCentral xx80 Appliances | 111
Four-Port 1-GbE Fiber SX card
Four-Port 1-GbE Fiber SX card
Two types of Four-Port 1-GbE cards are available. Both can be installed in the 2U SteelHead CX5080 and
CX7080 appliances. Type 2 cards are supported on software versions RiOS 9.9 or later.l
Note:
The physical ports on the NICs are mapped in proximity to the PCI bus edge connector. The port closest to
the edge connector is L0, then W0, L1, followed by W1.
Figure A-3. Four-Port 1-GbE Fiber SX Type 1 card (NIC-1-001G-4SX-BP)
Figure A-4. Four-Port 1-GbE Fiber SX Type 2 card (NIC-1-001G-4SX-BP)
Specification
Descriptions
Connectors
Four shielded RJ-45
Cables and operating distance
10-Base-T Category 3, 4, or 5 maximum 50 m*
100-Base-TX Category 5 maximum 5m*
1000-Base-T Category 5E maximum 5E m*
*Theoretical distance is defined as half a distance as stated by the IEEE 802.3
standard.
Port
Description
L0, W0, L1, W1
TX and RX provides access to 1000 Base-SX
LED
Type 1 definitions
Type 2 definitions
LNK
—
Link = Green
LNK/ACT
Link = Green
Activity = Blinks green
—
BYP/DSC
Normal = Off
Disconnect = Yellow
Bypass = Green
Normal = Off
Disconnect = Yellow
Bypass = Green
ACT
—
On = Blinks orange