Zzipp ZZBUBBLE, Руководство пользователя

Страница: 6 / 28

ENGLISH
IT
ALIANO
ESP
ANOL
6
MENU’ MAP
WIRELESS REMOTE CONTROL
Ready To Work
After about a minutes heating, it will show this page
Interval Set
Press UP or DOWN button to set interval of TIMER mode 5~200s
Duration Set
Press UP or DOWN to set duration of TIMER mode 5~200s
Bubble
Press UP or DOWN to set Bubble output ON /OFF
Haze Output
Press UP or DOWN to set haze volume 1% ~ 100%
Fan Speed
Press UP or DOWN to set fan speed 1% ~ 100%
LED Color
Press UP or DOWN to select color
Red\ Green\Blue\Amber\Yellow\ Sky blue\Purple\ White\ RGBA
Fade\ All
Fade\ RGBA Scroll\ All Scroll
DMX Address
Press UP or DOWN to set DMX address 1 ~ 512
Clean Mode
Press UP or DOWN to set cleaning mode ON/OFF
(When cleaning mode is ON, it will override all the other functions.
Default cleaning time is 1 minute without turning of the mode
manually.)
Language
PressUP or DOWN to select language
English/Chinese
Under Timer or Volume Mode, the working status is based on bubble output, haze output, Fan
Speed and LED color set by the LCD control board.
Plug the wireless receiver into the bubble fogger 5-pin port labeled “REMOTE CONTROL”.
There are 2 buttons on the wireless remote transmitter which act as triggers.
Function of the remote buttons are:
Button A: ON
Button B: OFF
When use wireless remote controller, the working status is based on bubble output, haze
output, Fan speed and LED color set by the LCD control board.