11Mbps Wireless Ethernet Adapter User's Manual
7
2.Hardware Installation
Physical Details
Rear Panel
INIT Button
“INIT”
mean “Initiation”. While pressing the button, the adapter will
reboot and reset current settings to factory default settings. The left
indicator “DIAG” on adapter will be off and then begin blinking.
Then this initiation action will be completed when the indicator
“ DIAG” is always green instead of blinking.
LAN Cable
Selection Switch
X
Crossover:
the RJ-45 port Tx and Rx lines are
reversed. Use this setting when you use the supplied
straight
cable connected to PC. It is also the factory
default setting.
II
Straight:
the RJ-45 port Tx and Rx lines are normal.
Use this setting when you have the supplied
straight
cable connected to Hub/switch
Power Input
Only use the power adapter supplied with the Ethernet adapter
LAN Connection
Use standard Ethernet cable (RJ-45 connector) to connect your
PC, hub/switch or broadband router/modem to this port.
LAN Connection
Power Input
INIT Button
LAN Cable
Selection Switch
