11Mbps Wireless Ethernet Adapter User's Manual
22
The Server Tab
IP Address Mode:
Select “
Static
” or
“
DHCP
” mode. For “
Static
” mode,
the IP address settings are given by
user. For “DHCP” mode, IP settings
will be overridden by a DHCP server
on your network. The default setting
is “
Static
”
IP Address:
The static IP address
you may assign to the adapter. The
default value is “
169.254.100.100
”.
IP Subnet:
The subnet mask you
want to assign for the adapter. The
default value is “
255.255.0.0
”.
IP Gateway:
The gateway you want
to assign for the adapter. The default
value is “
169.254.1.254
”.
Allow upgrade uploads:
Check the
box, and then it is allowed to
upgrade firmware.
Note!
You may need to reboot the adapter, and then re-load the page to see
any new settings.
The Admin Tab
Change password:
Default
password is “
1234
”. For security
concerns, please change it after
finish the configuration.
Reboot Adapter:
When any setting
was changed, the adapter MUST be
reboot so that the change can be
confirmed.
Reset to factory defaults:
This
option will ERASE all the current
settings, and restore to the factory
default settings.
Note!
You may need to reboot the adapter, and then re-load the page to see
any new settings.