11Mbps Wireless Ethernet Adapter User's Manual
19
4. Configuring the Ethernet Adapter
The Info Tab
(Connected with wireless LAN)
(NOT Connected with any wireless LAN)
SSID:
displays current SSID this
adapter uses.
If the adapter found no AP or any
other ad-hoc device, then SSID will
show “
non-spec
” . Please make
sure that your wireless LAN is
working properly under the effective
reach range of the adapter
Channel:
displays the channel that
the adapter uses now.
BSSID:
displays MAC address of the
AP that the adapter is connecting
with.
Transmission Rate:
the transfer
data rate that the adapter is using in
wireless LAN
Link Quality (%):
displays the
wireless LAN connection integrity
when connected to an AP.
MAC address:
displays the unique
serial number burned into the
adapter that identifies itself from
other Ethernet devices.
IP address:
displays the adapter’s
current IP address assigned by AP
or router.
Firmware Revision:
displays the
adapter’s current firmware version
Results of the most recent scan:
displays the recent scan over the
wireless LAN, and information of the
found and reachable APs will be
listed
When you re-load the web page, the
result will be updated once again.
