ZyXEL Communications ZyWall USG 50-H Series, Руководство пользователя

Страница: 414 / 704

Chapter 26 Application Patrol/BWM
ZyWALL USG 50-H User’s Guide
414
26.4.1 The Other Applications Add/Edit Screen
The Other Configuration Add/Edit screen allows you to create a new condition or edit an
existing one. To access this screen, go to the Other Protocol screen (see Section 26.4 on page
412 ), and click either the Add icon or an Edit icon.
BWM These fields show the amount of bandwidth the traffic can use. These fields only
apply when
Access is set to forward .
In - This is how much inbound bandwidth, in kilobits per second, this policy allows
the matching traffic to use. Inbound refers to the traffic the ZyWALL sends to a
connection’s initiator. If
no displays here, this policy does not apply bandwidth
management for the inbound traffic.
Out - This is how much outgoing bandwidth, in kilobits per second, this policy
allows the matching traffic to use. Outbound refers to the traffic the ZyWALL sends
out from a connection’s initiator. If
no displays here, this policy does not apply
bandwidth management for the outbound traffic.
Pri - This is the priority for the traffic that matches this policy. The smaller the
number, the higher the priority. Traffic with a higher priority is given bandwidth
before traffic with a lower priority. The ZyWALL ignores this number if the incoming
and outgoing limits are both set to 0. In this case the traffic is automatically treated
as being set to the lowest priority (7) regardless of this field’s configuration.
Log Select whether to have the ZyWALL generate a log ( log ), log and alert ( log alert )
or neither ( no ) when traffic matches this policy. See Chapter 38 on page 563 for
more on logs.
Add icon Click the Add icon in the heading row to add a new first entry.
The Active icon displays whether the entry is enabled or not. Click the Active icon
to activate or deactivate the entry. Make sure you click Apply to save and apply the
change.
Click the
Edit icon to go to the screen where you can edit the entry.
Click the Add icon in an entry to add a new entry below the current entry.
Click the Remove icon to delete an existing entry from the ZyWALL. A window
displays asking you to confirm that you want to delete the entry.
To move an entry up or down in the list, click on the
Move to N icon next to the
entry, and type the line number ( # field) of where you want to move the entry. The #
field is updated accordingly. The ordering of the entries is important as they are
applied in order of their numbering.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.
Table 143 AppPatrol/BWM > Other (continued)
LABEL DESCRIPTION