ZyXEL Communications ZyWall USG 50-H Series, Руководство пользователя

Страница: 233 / 704

Chapter 10 Policy and Static Routes
ZyWALL USG 50-H User’s Guide
233
10.3 IP Static Route Screen
Click Network > Routing > Static Route to open the Static Route screen. This screen
displays the configured static routes. Configure static routes to be able to use RIP or OSPF to
propagate the routing information to other routers.
Figure 174 Network > Routing > Static Route
The following table describes the labels in this screen.
10.3.1 Static Route Add/Edit Screen
Select a static route index number and click Add or Edit . The screen shown next appears. Use
this screen to configure the required information for a static route.
Maximize
Bandwidth Usage Select this check box to have the ZyWALL divide up all of the interface’s
unallocated and/or unused bandwidth among the policy routes that require
bandwidth. Do not select this if you want to reserve bandwidth for traffic that does
not match any of the policy routes.
OK Click OK to save your changes back to the ZyWALL.
Cancel Click Cancel to exit this screen without saving.
Table 82 Network > Routing > Policy Route > Edit (continued)
LABEL DESCRIPTION
Table 83 Network > Routing > Static Route
LABEL DESCRIPTION
# This is the number of an individual static route.
Destination This is the destination IP address.
Subnet Mask This is the IP subnet mask.
Next-Hop This is the IP address of the next-hop gateway or the interface through which the
traffic is routed. The gateway is a router or switch on the same segment as your
ZyWALL's interface(s). The gateway helps forward packets to their destinations.
Metric This is the route’s priority among the ZyWALL’s routes. The smaller the number, the
higher priority the route has.
Add icon Click the Add icon to go to the screen where you can set up a static route on the
ZyWALL.
Click the
Edit icon to go to the screen where you can edit the static route on the
ZyWALL.
Click the
Remove icon to delete an existing static route from the ZyWALL. A window
displays asking you to confirm that you want to delete the routing policy.