ZyXEL Communications ZyWALL USG 100 Series, Руководство пользователя

Страница: 629 / 1157

Chapter 34 IDP
ZyWALL USG 100/200 Series User’s Guide
629
Fragmentation A fragmentation flag identifies whether the IP datagram should be
fragmented, not fragmented or is a reserved bit. Some intrusions can
be identified by this flag. Select the check box and then select the
flag that the intrusion uses.
Fragmentation
Offset
When an IP datagram is fragmented, it is reassembled at the final
destination. The fragmentation offset identifies where the fragment
belongs in a set of fragments. Some intrusions use an invalid
Fragmentation Offset number. Select the check box, select Equal ,
Smaller or Greater and then type in a number
Time to Live Time to Live is a counter that decrements every time it passes
through a router. When it reaches zero, the datagram is discarded.
Usually it’s used to set an upper limit on the number of routers a
datagram can pass through. Some intrusions can be identified by the
number in this field. Select the check box, select
Equal , Smaller or
Greater and then type in a number.
IP Options IP options is a variable-length list of IP options for a datagram that
define IP
Security Option, IP Stream Identifier , (security and
handling restrictions for the military), Record Route (have each
router record its IP address), Loose Source Routing (specifies a list
of IP addresses that must be traversed by the datagram), Strict
Source Routing (specifies a list of IP addresses that must ONLY be
traversed by the datagram), Timestamp (have each router record
its IP address and time), End of IP List and No IP Options . IP
Options can help identify some intrusions. Select the check box,
then select an item from the list box that the intrusion uses
Same IP Select the check box for the signature to check for packets that have
the same source and destination IP addresses.
Transport Protocol The following fields vary depending on whether you choose TCP , UDP
or ICMP .
Transport
Protocol: TCP
Port Select the check box and then enter the source and destination TCP
port numbers that will trigger this signature.
Table 170 Configuration > Anti-X > IDP > Custom Signatures > Add/Edit (continued)
LABEL DESCRIPTION