ZyXEL Communications XS1920 Series, Руководство пользователя

Страница: 48 / 422

Chapter 6 Tutorials
XS1920 Series User’s Guide
48
Figure 25
Tutorial: Set the DHCP Server Port to Trusted
7
Go to Advanced Application > IP Source Guard > IPv4 Source Guard Setup > DHCP
snooping > Configure > VLAN , show VLAN 100 by entering 100 in the Start VID and End VID
fields and click Apply . Then select Yes in the Enabled field of the VLAN 100 entry shown at the
bottom section of the screen.
If you want to add more information in the DHCP request packets such as source VLAN ID or
system name, you can also select an
Option82 Profile in the entry. See Section 26.15.1.3 on page
250 .
Figure 26
Tutorial: Enable DHCP Snooping on this VLAN
8
Click Save at the top right corner of the web configurator to
save the configuration permanently.
9
Connect your DHCP server to port 5 and a computer (as DHCP client) to either port 6 or 7. The
computer should be able to get an IP address from the DHCP server. If you put the DHCP server on
port 6 or 7, the computer will not able to get an IP address.
10
To check if DHCP snooping works, go to Advanced Application > IP Source Guard > IPv4
Source Guard Setup , you should see an IP assignment with the type DHCP-Snooping as shown.