Chapter 2 The Web Configurator
WAP6906 User’s Guide
18
3
After accessing the connection’s general settings, click on the
Properties
button.
Note: You can also access the adapter’s settings by clicking on
Change adapter settings
located on the left side bar. Then right-clicking on the
Local Area Connection
icon and
selecting
Properties
.
4
In the connection’s properties select the
Internet Protocol Version 4 (TCP/IPv4)
item, then click on the
Properties
button.
5
Once you have accessed the
Internet Protocol Version 4 (TCP/IPv4)
properties, click on the
Use the
following IP address
radio button and type your new IP address. Your computer must be in the same
subnet in order to access this website address.You must give it a fixed IP address in the range between
192.168.1.6 and 192.168.1.254. Then type 255.255.255.0 as your subnet mask, click
OK
to close the
Internet Protocol Version 4 (TCP/IPv4) Properties
window. Then click
OK
to close the
Local Area
Connection