ZyXEL Communications VES-1012 - Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 46

ZyXEL Communications VES-1012 - Скачать руководство пользователя страница 11

VES-1012 Hardware Installation Guide

VES-1012 Applications

1-1

Chapter 1

VES-1012 Applications

This chapter describes VES-1012 applications and basic operating environment.

1.1 Applications

The following are typical VDSL multiplexing applications of the VES-1012:

1. Multiple Tenant Unit (MTU)

2. Enterprise

3. Campus

1.1.1 MTU

Application

The following figure depicts a typical application of the VES-1012 in a large residential building, or Multiple
Tenant Unit (MTU), that leverages existing phone line wiring to provide Internet access to all tenants.

A tenant connects a computer to the phone line in a unit using a VDSL modem. The other end of the phone line is
connected to a port on the VES-1012. The VES-1012 aggregates the traffic from the tenants to the Ethernet port
and forwards it to a router or switch. The router (or switch) then routes the traffic further to the Internet.

«
...
9
10
11
12
13
...
»

Содержание VES-1012 -















































Отзывы:

Нет отзывов