+FET=n
End the page or document command
n=0
More pages; same document
n=1
End of document; another document follows
n=2
No more pages or documents
n=4
Procedure interrupt: another page follows
n=5
Procedure interrupt: end of document, another document follows
n=6
Procedure interrupt: end of document
+FLID="string"
Local ID string parameter
+FLPL=n
Document for polling command
n=0
Indicate that the DTE has no document for polling
n=1
Indicate document available for polling
+FMDL?
Request DCE model
+FMFR?
Request DCE manufacturer
+FPTS=n
Page transfer status
n=1
Received page good
n=2
Page bad; retrain requested
n=3
Page good; retrain requested
n=4
Page bad; procedure interrupt requested
n=5
Page good; procedure interrupt requested
+FNS="<string of Hex>"
Non-standard frame FIF octet string
+FREV?
Request DCE revision
+FSPL=n
Enable polling command
n=0
Disable polling
n=1
Enable polling
All other +F commands are not supported but the modem will respond OK. In many cases this
means "don't care". See PN 2388 for command details.
The Class 2 Command Responses
Response
Function and Description
+FCIG:"String" Report remote ID response CIG
+FCFR Confirmation to receive prompt
+FCON Facsimile connection response
+FCSI:"String" Report remote ID response CSI
+FDCS:vr,br,wd,ln,df,ec,bf,st
Report session parameters response; refer to +FDCC=....
command.
+FDIS:vr,br,wd,ln,df,ec,bf,st
Report remote capabilities response; refer to +FDCC=....
command.
+FDTC:vr,br,wd,ln,df,ec,bf,st
Report remote capabilities response; refer to +FDCC=....
command.
+FET:n Post page message response; refer to +FET=n command.
+FHNG:nnn
Call termination status response.
nnn=00 Normal and proper end of connection.
nnn=10 Transmit error on phase A hangup code.
nnn=20 Transmit error on phase B hangup code.
nnn=40 Transmit error on phase C hangup code.
nnn=50 Transmit error on phase D hangup code.
nnn=70 Receive error on phase B hangup code.
nnn=90 Receive error on phase C hangup code.
nnn=100
Receive error on phase D hangup code.
+FNSC:"HEX string"
Report the non-standard facilities command frame. For example, the
polling security ID.
+FNSF:"HEX string"
Report the non-standard facilities frame response.
+FPOLL
Remote polling indication.