ZyXEL Communications RGS Series Скачать руководство пользователя страница 98

Страница: 98 / 259

Delete

To delete a RADIUS server entry, check this box. The entry will be deleted during
the next Save.

Hostname

The IP address or hostname of the RADIUS server.

Auth Port

The

UDP

port to use on the RADIUS server for authentication.

Acct Port

The

UDP

port to use on the RADIUS server for accounting.

Timeout

This optional setting overrides the global timeout value. Leaving it blank will use
the global timeout value.

Retransmit

This optional setting overrides the global retransmit value. Leaving it blank will use
the global retransmit value.

Key

This optional setting overrides the global key. Leaving it blank will use the global
key.

Buttons

Click to add a new RADIUS server, up to 5 servers are supported.

The button can be used to undo the addition of the new server.

Click to apply changes.

Click to undo any changes made locally and revert to previously saved values.

Содержание RGS Series




































































































































































































































































Результаты поиска

Содержание RGS Series

Отзывы:

Похожие инструкции для RGS Series

Бренды по названию

Популярные бренды

ZyXEL Communications RGS Series, Руководство пользователя

Результаты поиска

Содержание RGS Series

Отзывы:

Похожие инструкции для RGS Series

Бренды по названию

Популярные бренды