ZyXEL Communications RGS Series, Руководство пользователя

Страница: 131 / 259

131
5.3.58 LLDP – LLDP Configuration
This page allows the user to inspect and configure the current LLDP port settings.
Object Description
LLDP Parameters
Tx Interval The switch periodically transmits LLDP frames to its neighbors for having the network
discovery information up-to-date. The interval between each LLDP frame is
determined by the Tx Interval value. Valid values are restricted to 5 - 32768 seconds.
Tx Hold Each LLDP frame contains information about how long the information in the LLDP
frame shall be considered valid. The LLDP information valid period is set to Tx Hold
multiplied by Tx Interval seconds. Valid values are restricted to 2 - 10 times.
Tx Delay
If some configuration is changed (e.g. the IP address) a new LLDP frame is
transmitted, but the time between the LLDP frames will always be at least the value
of Tx Delay seconds. Tx Delay cannot be larger than 1/4 of the Tx Interval value.
Valid values are restricted to 1 - 8192 seconds.
Tx Reinit
When a port is disabled, LLDP is disabled or the switch is rebooted, an LLDP
shutdown frame is transmitted to the neighboring units, signaling that the LLDP
information isn't valid anymore. Tx Reinit controls the amount of seconds between
the shutdown frame and a new LLDP initialization. Valid values are restricted to 1 - 10
seconds.
LLDP Port Parameters
Port The switch port number of the logical LLDP port.
Mode
Select LLDP mode.
Rx only
The switch will not send out LLDP information, but LLDP information from
neighbor units is analyzed.