ZyXEL Communications Prestige 643 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 191

background image

Prestige 643 ADSL Router

1-2

Getting to know your Prestige

z

Internal SPTGEN

Internal SPTGEN (System Parameter Table Generator) lets you configure, save and upload multiple menus
at the same time using just one configuration text file - eliminating the need to navigate and configure
individual SMT menus for each Prestige.

Versions of Internal SPTGEN differ by Prestige model.

z

Transmission Rate Stand

a

rds

♦

Supports Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt(G.992.1); G.lite(G992.2))

1

.

♦

Full-Rate (ANSI T1.413, Issue 2; G.dmt(G.992.1)) with line rate support of up to 8Mbps
downstream and 1024kbps upstream.

♦

G.lite (G.992.2) with line rate support of up to 1.5Mbps downstream and 512Kbps upstream.

z

IP Alias

IP Alias allows you to partition a physical network into logical networks over the same Ethernet interface.
The Prestige supports three logical LAN interfaces via its single physical Ethernet interface with the
Prestige itself as the gateway for each LAN network.

z

IP Multicast

Traditionally, IP packets are transmitted in two ways: unicast or broadcast. Multicast is a third way to
deliver IP packets to a group of hosts. IGMP (Internet Group Management Protocol) is the protocol used to
support multicast groups. The latest version is version 2 (see RFC2236). Both versions 1 and 2 are
supported by the Prestige

z

IP Policy Routing (IPPR)

Traditionally, routing is based on the destination address only and the router takes the shortest path to
forward a packet. IP Policy Routing (IPPR) provides a mechanism to override the default routing behavior
and alter the packet forwarding based on the policy defined by the network administrator.

z

10/100M Auto-negotiation Ethernet/Fast Ethernet Interface

This auto-negotiation feature allows the Prestige to detect the speed of incoming transmissions and adjust
appropriately without manual intervention. It allows data transfer of either 10 Mbps or 100 Mbps in either
half-duplex or full-duplex mode depending on your Ethernet network.

z

Protocols Supported

TCP/IP (Transmission Control Protocol/Internet Protocol) network layer protocol.

1

Depends on firmware release version.

«
...
21
22
23
24
25
...
»

Содержание Prestige 643
































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Prestige 643

Бренд: ICP DAS USA Страницы: 8

Бренд: Hawking Страницы: 2

ZyXEL EES-1024AF

Бренд: ZyXEL Communications Страницы: 99

X-Pedition 2000

Бренд: Enterasys Страницы: 86

Бренд: US Robotics Страницы: 156

Бренд: ZyXEL Communications Страницы: 2

Fieldpoint cFP-RTD-124

Бренд: National Instruments Страницы: 15

Бренд: UfiSpace Страницы: 34

2000 IDU Series

Бренд: EMS Страницы: 52

Бренд: Network Critical Страницы: 200

Бренд: Patton electronics Страницы: 145

Бренд: TP-Link Страницы: 37

Бренд: Xantech Страницы: 16

CyberSWITCH CSX101

Бренд: Cabletron Systems Страницы: 72

Бренд: B+B SmartWorx Страницы: 50

Бренд: Cradlepoint Страницы: 2

NetVanta 300 Series

Бренд: ADTRAN Страницы: 2

Бренд: ZyXEL Communications Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды