ZyXEL Communications PRESTIGE 153, Руководство пользователя, Страница: 170 / 186

Prestige 153/153X WAN Bridge/Routers
13-10 Chapter 13 System Maintenance
The following Table 13-3 describes the eight diagnostic test options available in Menu 24.4 to test
your Prestige and its connections.
Table 13-3. System Maintenance Menu Diagnostic Test Options
Fields Description
Drop WAN Port This command will drop the call in the specified WAN port.
Reset WAN Port This command will reset the specified WAN port.
Redirect to WAN Port This command will redirect SMT (System Manager Terminal) to the specified WAN
port. To redirect to a WAN Port, you must set [Port Speed] of the WAN Port (in
Menu 2) to match [Terminal Baud Rate] in Menu 24.2.
Internet Setup Test This test checks to see if your Internet access configuration has been done
correctly. When this option is chosen, your Prestige will PING the Internet IP
Address. If everything is working properly, you will receive an appropriate
response. Otherwise, note the error message and consult your network
administrator.
Ping Host This diagnostic test pings the host which determines the functionality of the TCP/IP
protocol on your system.
Reboot System This option reboots the system. This serves to implement any changes that may
have been recently added to your system.
Command Mode This option allows the user to enter the command mode. This mode allows you to
diagnose and test your Prestige using a specified set of commands.
Manual Call This provides a way for the users of the Prestige to place a manual call to a
Remote Node. This tests the connectivity to that Remote Node. When you use this
command, you will see traces displayed on the screen showing what is happening
during the call setup and protocol negotiation.