manualshive.com logo in svg

ZyXEL Communications PRESTIGE 153, Руководство пользователя, Страница: 131 / 186

Поделиться
Скачать
ZyXEL Communications PRESTIGE 153 Скачать руководство пользователя страница 131

Prestige 153/153X  WAN Bridge/Routers

8-5

Chapter 8

 Bridge Configuration for LAN-to-LAN

Table 8-3 describes the protocol-dependent parameters for the Bridge options in the Remote Node
Profile and Network Layers menus.

Table 8-3.

Remote Node Network Layers Menu Bridge Options

Field

Description

Bridge

Make sure this field is set to [Yes].

Edit IP/IPX/Bridge

Press the space bar to change it to [Yes] and press [Enter] to go to the
Network Layer Options Menu.

Dial-On-Broadcast

This field is necessary for your Prestige on the caller side LAN. When set to
[Yes], any broadcasts coming from the LAN will trigger your Prestige to
make a call to that Remote Node. If it is set to [No], your Prestige will not
make the outgoing call.

Ethernet Addr Timeout (min)

In this field, enter the time (number of minutes) that you wish your Prestige
to retain the Ethernet Addr information in its internal tables while the line is
down. If this information is retained, then your Prestige will not have to re-
negotiate the protocol and recompile the tables when the line is brought
back up.

Once you have completed filling in the Network Layer Options Menu, press [Enter] to return to Menu 11.1.
Then press [Enter] at the message [Press ENTER to Confirm…] to save your selections, or press [Esc] to
cancel.

Содержание PRESTIGE 153



























































































































































































Отзывы:

Нет отзывов