ZyXEL Communications Prestige 128Plus, Руководство пользователя, Страница: 83 / 203

Prestige 128+ ISDN Router
Remote Node Configuration 4-11
Table 4-3 Remote Node PPP Options Menu Fields
Field Description Option
Standard
PPP
Encapsulation Select the CISCO PPP only when this remote node
is a Cisco machine; otherwise, select the
Standard PPP.
CISCO PPP
Compression Turn on/off Stac Compression. The default for this
field is Off .
On/Off
(Default = Off )
Multiple Link Options:
BOD Calculation Select the direction of the traffic you wish to use in
determining when to add or subtract a link. The
default for this field is
Transmit or Receive .
Default =
Transmit or
Receive
Base Trans Rate Select the base data transfer rate for this remote
node in Kbps. There are two choices for this field-
64 where only one channel is used or 128 where
two channels are used as soon as a packet
triggers a call
64/128
Max Trans Rate Enter the maximum data transfer rate allowed for
this remote node. This parameter is in kilobits per
second. There are two choices for this field- same
as above. 64/128
Target Utility
(kbps) Enter the two thresholds separated by a [-] for
subtracting and adding the second port. Default=10-20
Add Persist This parameter specifies the number of seconds
where traffic is above the adding threshold before
the Prestige will bring up the second link. Default = 5 sec
Subtract Persist This parameter specifies the number of seconds
where traffic is below the subtraction threshold
before your Prestige drops the second link. Default = 5 sec
Once you have completed filling in Menu 11.2 - Remote Node PPP Options, press [Enter] at
the message [Press ENTER to Confirm…] to save your configuration, or press [Esc] at any
time to cancel.