ZyXEL Communications Prestige 128Plus Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 203

ZyXEL Communications Prestige 128Plus Скачать руководство пользователя страница 2

Prestige

128+ ISDN Router

ii

Prestige 128

Plus

ISDN Router

Copyright

Copyright © 02.08.1999 by ZyXEL Communications Corporation.

The contents of this publication may not be reproduced in any part or as a whole, transcribed,

stored in a retrieval system, translated into any language, or transmitted in any form or by any
means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise,
without the prior written permission of ZyXEL Communications Corporation.

Published by ZyXEL Communications Corporation. All rights reserved.

Disclaimer

ZyXEL does not assume any liability arising out of the application or use of any products, or

software described herein. Neither does it convey any license under its patent rights nor the patent
rights of others. ZyXEL further reserves the right to make changes in any products described herein
without notice. This publication is subject to change without notice.

Trademarks

Trademarks mentioned in this publication are used for identification purposes only and may be
properties of their respective owners.

«
1
2
3
4
...
»

Содержание Prestige 128Plus












































































































































































































Отзывы:

Нет отзывов