ZyXEL Communications Prestige 128Plus, Руководство пользователя, Страница: 106 / 203

Prestige 128+ ISDN Router
7-2 Bridging Setup
From Menu 3 - Ethernet Setup, enter option
Bridge Setup
and Menu 3.4 -
Bridge Ethernet Setup displays as shown below.
Figure 7-1 Menu 3.5 - Bridge Ethernet Setup
The following table describes how to configure the Handle IPX field in Menu
3.5.
Table 7-1 Bridge Ethernet Setup Menu - Handle IPX Field Configuration
Handle IPX Field
(Menu 3.5)
Description
None When there is no IPX traffic on the LAN or when you do not want to
apply any special handling for IPX.
Client When there are only client workstations on the LAN. RIP and SAP
(Service Advertising Protocol) response packets will not trigger calls.
Server When there are only IPX servers on the LAN. No RIP or SAP packets
will trigger calls. In addition, during the time when the line is down, your
Prestige will reply to watchdog messages from the servers on behalf of
remote clients. The period of time that your Prestige will do this is linked
to the Ethernet Address Timeout parameter in each remote node (see
Remote Node Configuration). When a remote Ethernet address is aged
out, there is no need to maintain its connection to the IPX server.
If there are both clients and servers on the LAN, and the local clients will access
the remote servers, set this field to
Server but turn on the Dial-On-Broadcast
parameter in Menu 11.3 to allow the client queries to trigger calls.
Menu 3.4 - Bridge Ethernet Setup
Handle IPX= None
Press ENTER to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.