Quick Start Manual for Prestige 100L
14
Table 8
LAN DHCP Setup Menu Fields
FIELD
DESCRIPTION
EXAMPLE
DHCP
This field enables/disables the DHCP server. If it is set to
Server
, your Prestige acts as a DHCP server. If set to
None
,
DHCP service is disabled and you must have another DHCP
sever on your LAN, or else the workstation must be manually
configured. When DHCP is set to
Server
, the following four
items need to be set. If set to
Relay
, the Prestige acts as a
surrogate DHCP server and relays requests and responses
between the remote server and the clients.
None / Relay /
Server
(default)
Client IP Pool
Starting Address
This field specifies the first of the contiguous addresses in the
IP address pool.
192.168.1.33
Size of Client IP Pool
This field specifies the size, or count, of the IP address pool.
32
Primary DNS Server
Secondary DNS
Server
Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and
the subnet mask.
Relay Server
Address
When the DHCP is set to
Relay
, the Prestige relays the DHCP
requests/responses between the PCs and the real DHCP server.
Follow the instructions in the following table to configure TCP/IP parameters for the LAN port.
Table 9
LAN TCP/IP Setup Menu Fields
FIELD
DESCRIPTION
EXAMPLE
IP Address
Enter the IP address of your Prestige in dotted decimal notation.
192.168.1.1
(default)
IP Subnet Mask
Your Prestige automatically calculates the subnet mask based on
the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige.
255.255.255.0
RIP Direction
Press [space bar] to select the RIP direction from
Both/In Only/Out
Only/None.
Both
(default)
Version
Press [space bar] to select the RIP version from
RIP-1 / RIP-2B /
RIP-2M.
RIP-1
(default)