ZyXEL Communications PLA series, Руководство пользователя

Страница: 37 / 66

Chapter 4 The Configuration Utility
PLA Series User’s Guide
37
4.5 Advanced Screen
You can configure the powerline adapters on your network to give priority to network traffic
depending on its importance. When you set the priority of a powerline adapter, you set how quickly
messages FROM your powerline adapter are sent in your powerline network. Transmissions TO your
powerline adapter do not receive any priority.
For example, if you have a file server on your home network to deliver music and movie files to
computers in your home, you should set the priority of the powerline adapter connected to this
server to
Medium . If video traffic is delivered too slowly, quality problems may occur.
On the other hand, a powerline adapter attached to a printer should have a low priority setting
since the slow delivery of messages will not affect the print job.
Similarly, if you want to prioritize any downloads from the Internet, set the priority on the powerline
adapter attached to your Internet gateway to
High .
DAK Password DAK (Device Access Key) password is used to verify that you are authorized to perform
changes on a remote device. You can find the DAK password printed on a sticker on the
bottom of your PLA.
Select the remote powerline adapter you want to manage by clicking the MAC address
which corresponds to it in the
MAC Address column. Enter the DAK Password value and
click Save .
Note: You must enter the DAK Password value exactly as it is printed on the label (all caps
and with dashes “-”).
Network Name
(NMK) The default network name (sometimes called a network password or network membership
key (NMK)) of the PLA is “
HomePlugAV ”. HomePlug compatible devices use the same
network name to recognize and communicate with each other over the powerline network.
If you change the network name of one device on the network, it will no longer be
recognized as part of that network.
If you change the network name, make sure you change the network name for all of the
powerline adapters that you want to be part of your powerline network.
The network name can be from 8 to 64 characters in length, using “A”~”Z”, “a”~”z”,
“0”~”9”; spaces are not allowed.
Set NMK to this
device Select this to apply the NMK (entered in the field above) as the network name for the
powerline adapter directly connected to the computer running the configuration utility.
Set NMK to all
devices Select this to apply the NMK (entered in the field above) as the network name for all
powerline adapter detected by the utility.
Write Click this to apply your changes. The new Network Name is applied to the selected
powerline adapter.
Note: You must enter the correct DAK password for the selected remote powerline adapter
before you can make changes to it.
Table 10
Configuration Screen (continued)
LABEL DESCRIPTION