P-873HNUP-51B Support Notes
All contents copyright (c) 2011 ZyXEL Communications Corporation.
Prologue
Before we begin.
The device is shipped with the following factory defaults:
1. IP address = 192.168.1.1, subnet mask = 255.255.255.0 (24 bits)
2. DHCP server enabled with IP pool starting from 192.168.1.2
3. Default username/password = admin/1234
Setting up the PC (Windows OS)
1. Ethernet Connection
All PCs must have an Ethernet adapter card installed
2. TCP/IP Installation
You must first install the TCP/IP software on each PC before you can use it for the
Internet access. If you have already installed the TCP/IP, go to the next section to
configure it; otherwise, follow these steps to install:
In the
Control Panel/Network
window, click
Add
button.
In the
Select Network Component Type
windows, select
Protocol
and click
Add
.
In the
Select Network Protocol
windows, select
Microsoft
from the
manufacturers, then select
TCP/IP
from the
Network Protocols
and click
OK
.
3. TCP/IP Configuration
Follow these steps to configure Windows TCP/IP:
In the
Control Panel/Network
window, click the
TCP/IP
entry to select it and
click
Properties
button.
In the
TCP/IP
Properties window, select
obtain an IP address automatically
.
Note: Do not assign the arbitrary IP address and subnet mask to your PCs; otherwise,
you will not be able to access the Internet.
Click the
WINS
configuration tab and select
Disable WINS Resolution
.