manualshive.com logo in svg

ZyXEL Communications P-663H-51, Руководство пользователя

Поделиться
Скачать
ZyXEL Communications P-663H-51 Скачать руководство пользователя страница 193

P-663H-51 User’s Guide

193

A

P P E N D I X

   

F  

Legal Information

Copyright

Copyright © 2007 by ZyXEL Communications Corporation.

The contents of this publication may not be reproduced in any part or as a whole, transcribed, 
stored in a retrieval system, translated into any language, or transmitted in any form or by any 
means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or 
otherwise, without the prior written permission of ZyXEL Communications Corporation.

Published by ZyXEL Communications Corporation. All rights reserved.

Disclaimer

ZyXEL does not assume any liability arising out of the application or use of any products, or 
software described herein. Neither does it convey any license under its patent rights nor the 
patent rights of others. ZyXEL further reserves the right to make changes in any products 
described herein without notice. This publication is subject to change without notice.

Trademarks

ZyNOS (ZyXEL Network Operating System) is a registered trademark of ZyXEL 
Communications, Inc. Other trademarks mentioned in this publication are used for 
identification purposes only and may be properties of their respective owners.

Certifications

Federal Communications Commission (FCC) Interference Statement

The device complies with Part 15 of FCC rules. Operation is subject to the following two 
conditions:

• This device may not cause harmful interference.

• This device must accept any interference received, including interference that may cause 

undesired operations.

This device has been tested and found to comply with the limits for a Class B digital device 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This device generates, 
uses, and can radiate radio frequency energy, and if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there is 
no guarantee that interference will not occur in a particular installation.

Содержание P-663H-51















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды