ZyXEL Communications P-660W-T1 v2, Руководство пользователя

Страница: 67 / 244

Chapter 6 Wireless LAN
P-660W-Tx v2 User’s Guide
67
6.3.1 No Security
In the Wireless screen, select No Security from the Security Mode list to allow wireless
stations to communicate with the ZyXEL Device without any data encryption.
"
If you do not enable any wireless security on your ZyXEL Device, your network
is accessible to any wireless networking device that is within range.
Figure 22 Wireless: No Security
The following table describes the security labels in the screen when you select No Security
from the Security Mode list.
6.3.2 WEP Encryption
WEP encryption scrambles the data transmitted between the wireless stations and the access
points to keep network communications private. It encrypts unicast and multicast
communications in a network. Both the wireless stations and the access points must use the
same WEP key.
Your ZyXEL Device allows you to configure up to four 64-bit, 128-bit or 256-bit WEP keys
but only one key can be enabled at any one time.
Table 17 Wireless: No Security
LABEL DESCRIPTION
Security Mode Choose No Security from the drop-down list box.
Back Click Back to return to the previous screen.
Apply Click Apply to save your changes.
Reset Click Reset to reload the previous configuration for this screen.