P-660R-Tx Series Support Note
OS
FAQ
1. How do I access the P-660R-Tx Command Line Interface (CLI)?
The Command Line Interface is for the administrator use only, and it could be
accessed via telnet session.
Begin telnet session:
(1) Choose
“start” on your computer →“run”
(2) Input
“cmd” and enter
(3) Input
“telnet xxx.xxx.xxx.xxx” ( note that there is a space between the two),
(4) Enter to login in the CLI.
Note:
It
is
protected
by
super
password,
“1234” by factory default.
2. How do I update the firmware and configuration file?
You can do this if you access the P-660R-Tx as administrator. You can upload
the firmware and configuration file to P-660R-Tx from Web Configurator, or
using FTP software. You CAN NOT upload the firmware and configuration file via
Telnet because the Telnet connection will be dropped during uploading the
firmware. Please do not power off the router right after the FTP uploading is
finished, the router will upload the firmware to its flash at this moment.
(1) Update on web configuration page, Advanced Setup
，
Maintenance -> Firmware
You can check your current firmware version and upgrade the firmware of
the Router in this page. Make sure the firmware you want to use is on the
local hard drive of the computer. Click on Browse to browse the local hard
drive and locate the firmware to be used for upgrade.
(2) Update firmware with FTP
a) Use the FTP client program in your PC to login to your P-660R-Tx.
Note
that
it
is
protected
by
user
name
and
password,
“admin”
and
“1234”
by
default.
b) To update firmware, you need to use the command:
put xx.bin ras
for
firmware or
put xx.rom rom-0
for rom file.
xx.bin means the firmware on your local hard drive and xx.rom means
rom file on your local hard drive. You can simply draw them into the
window.
Note: There may be firmware that could not be upgraded from Web
Configurator. In this case, ZyXEL will prepare special Upload Software
4
All contents copyright © 2010 ZyXEL Communications Corporation.
