P-660R-Tx Series Support Note s
P-660R-Tx
Example
The following example shows how to dial to an ISP via the P-660R-Tx and then
establish a tunnel to a private network. There will be three items that you need to
set up for PPTP application, these are PPTP server (WinNT), PPTP client (Win9x)
and the P-660R-Tx.
(1) PPTP server setup (WinNT)
Add the VPN service from Control Panel ->Network
Add an user account for PPTP logged on user
Enable RAS port
Select the network protocols from RAS such as IPX, TCP/IP NetBEUI
Set the Internet gateway to P-660R-Tx
(2) PPTP client setup (Win9x)
Add one VPN connection from Dial-Up Networking by entering the correct
username & password and the IP address of the P-660R-Tx's Internet IP
address for logging to NT RAS server.
Set the Internet gateway to the router that is connecting to ISP
(3) P-660R-Tx setup
Before making a VPN connection from Win9x to WinNT server, you
need to connect P-660R-Tx router to your ISP first.
Enter the IP address of the PPTP server (WinNT server) and the
port number for PPTP as shown below:
Select service name as
„PPTP
‟
, fill in the Server IP Address, then press button
„Save
‟
.
36
All contents copyright © 2010 ZyXEL Communications Corporation.
