P-660R-Tx Series Support Notes
Key Settings
Field
Description
Login ACS
Configure this part of the screen to log into the management server.
CWMP
Select
Activated
to allow the ZyXEL Device to be managed by a management
server or select
Deactivated
to not allow the ZyXEL Device to
be managed by a management server.
URL
Type in the IP address or domain name of the management server.
User Name
Type a user name of up to xxx printable characters found on an
English-language keyboard.
Password
Type a password of up to xxx printable characters found on an
English-language keyboard. Spaces are not allowed.
Connection
Request
Use this part of the screen to allow the management server to connect to the
ZyXEL Device after a successful login.
Path
This is the part for verification from ACS to ZyXEL Device. It can be
considered as CPE
‟
s URL. When ACS initialize a session, it will connect
with CPE basing on this part.
Port
The default port for access to the ZyXEL Device from the management server
is the HTTP port, port 80. If you change it, make sure it does not conflict with
another port on your network and it is recommended to use a port number
above 1024 (not a commonly used port). The management server should use
this port to connect to the ZyXEL Device. You may need
to alter your firewall or NAT port forwarding rules if they were already
configured.
Periodic
Inform
Select
Activated
to have the ZyXEL Device periodically send information to
the management server (recommended if CWMP is enabled) or select
Deactivated
to not have the ZyXEL Device periodically send information to
the management server
Interval
Enter a value between 1 and 86400 seconds.
17
All contents copyright © 2010 ZyXEL Communications Corporation.
