ZyXEL Confidential
26/34
sys filter sw [on|off]
set filter status switch
sys filter set <set>
display filter rule
sys filter netbios disp
display netbios filter status
sys filter netbios config <0:LAN to WAN,
1:WAN to LAN, 2:LAN to DMZ, 3:IPSec
passthrough, 4:Trigger Dial> <on|off>
config netbios filter
sys cpu display
display CPU utilization
sys upnp active [0:no/1:yes]
Activate or deactivate the saved upnp settings
sys upnp config [0:deny/1:permit]
Allow users to make configuration changes. through UPnP
sys upnp display
display upnp information
sys upnp firewall [0:deny/1:pass]
Allow UPnP to pass through Firewall.
sys upnp load
save upnp information
sys upnp reserve [0:no/1:yes]
Reserve UPnP NAT rules in flash after system bootup.
sys upnp save
save upnp information
sys packetscan display
sys packetscan active
sys packetscan type [email|http|ftp] [yes|no]
sys packetscan autoupdate display
sys packetscan autoupdate set
[0:none|1:1hr|2:12hr|3:24hr]
sys packetscan autoupdate query
sys packetscan monitor session
sys packetscan monitor ftptable
sys packetscan monitor create[number of
session]
sys packetscan debug [0:Off|1:Pkt Scan
2:Online update level 1|3:Online update level
2|4:Virus delect]
sys packetscan backscan
sys packetscan save
sys packetscan version
sys packetscan overflowaction [forward |
block]
sys packetscan expire
sys packetscan lk
sys packetscan register [yes | no]
sys atsh
sys atmu
display multi boot version
sys modemmode [crc|checksum]
sys diag
sys routeip <on|off>
sys bridge <on|off>
sys save
sys display
sys password
sys default
Restore default Romfile.
sys winmes send [Host IP][Messages
string][Retry]
sys winmes debug [0|1|2]
