ZyXEL Communications P-660HW-T1 V2, Руководство по выпуску

Страница: 19 / 34

ZyXEL Confidential
19/34
[gateway] [metric] Example:
> ip ro addrom set 192.168.1.33/24 192.168.1.1 2
ip route addrom private [yes|no] Set Private Flag Menu 12.1
ip route addrom disp Display both working buffer and Editing Entry Menu 12.1
ip route addrom freememory Discard all changes Menu 12.1
ip route addrom save Save edited settings Menu 12.1
ip route addrom clear [Index #] Clear Static Route Index Menu 12.1
bridge staticRoute index [Rule #] Select a bridge Static Route index 1-16 to edit Menu 12.3
bridge staticRoute name [Name] Set Rule Name Menu 12.3
bridge staticRoute active [on|off] Set Active or Inactive Flag Menu 12.3
bridge staticRoute set [ether address]
[ipaddress] [gatewayNode]
Set bridge static route
Example:
>bridge staticRoute set 001349012345 192.168.1.1 1 Menu 12.3
bridge staticRoute display Display both working buffer and Editing Entry Menu 12.3
bridge staticRoute freememory Discard all changes Menu 12.3
bridge staticRoute save Save edited settings Menu 12.3
bridge staticRoute clear [Index #] Clear Static Route Index Menu 12.3
sys dialinUser index [index #]
Set the index of dial-in user, you may apply this command
first before you begin to configure the dial-in user. Menu 14
sys dialinUser username [username] Set the name of dial-in user Menu 14
sys dialinUser active [yes | no] Active the dial-in user Menu 14
sys dialinUser password [password] Set password Menu 14
sys dialinUser display Display configuration Menu 14
sys dialinUser save Save configuration Menu 14
sys dialinUser free Free buffer info of the dial-in user Menu 14
sys dialinUser clear Delete the dial-in user Menu 14
ip nat addrmap map [map#] [set name]
Select NAT address mapping set and set mapping set name,
but set name is optional
Example:
> ip nat addrmap map 1 myset Menu 15.1
ip nat addrmap rule [rule#] [insert | edit]
[type] [local start IP] [local end IP] [global
start IP] [global end IP] [server set #]
Set NAT address mapping rule. If the “type” is not
“inside-server” then the “type” field will still need a dummy
value like “0”.
Type is 0 - 4 = one-to-one, many-to-one,
many-to-many-overload, many-to-many-non overload,
inside-server
Example:
> ip nat addrmap rule 1 edit 3 192.168.1.10 192.168.1.20
192.168.10.56 192.168.1.56 0 Menu 15.1
ip nat addrmap clear [map#] [rule#] Clear the selected rule of the set Menu 15.1
ip nat addrmap freememory Discard Changes Menu 15.1
ip nat addrmap disp Display nat set information Menu 15.1
ip nat addrmap save Save settings Menu 15.1
ip nat server load [set#] Load the server sets of NAT into buffer Menu 15.2
ip nat server disp [1]
“disp 1” means to display the NAT server set in buffer, if
parameter “1” is omitted, then it will display all the server
sets
Menu 15.2
ip nat server save Save the NAT server set buffer into flash Menu 15.2
ip nat server clear [set#]
Clear the server set [set#], must use “save” command to let it
save into flash
Menu 15.2
ip nat server edit [rule#] active Activate the rule [rule#], rule number is 1 to 24, the number Menu 15.2