manualshive.com logo in svg

ZyXEL Communications P-3202HN-Ba, Руководство пользователя

Поделиться
Скачать
ZyXEL Communications P-3202HN-Ba Скачать руководство пользователя страница 65

 Chapter 7 LAN Setup

IAD User’s Guide

65

7.5  LAN Client List

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows 
individual clients to obtain TCP/IP configuration at start-up from a server. You can 
configure the IAD as a DHCP server or disable it. When configured as a server, the 
IAD provides the TCP/IP configuration for the clients. If DHCP service is disabled, 
you must have another DHCP server on your LAN, or else the computer must be 
manually configured.

Click Network > LAN > Client List to open the following screen. 

The read-only 

table shows current DHCP client information of all network clients using the IAD’s 

First DNS Server

Second DNS 
Server

Third DNS Server

Select FromISP if your ISP dynamically assigns DNS server 
information (and the IAD's WAN IP address).

Select UserDefined if you have the IP address of a DNS server. Enter 
the DNS server's IP address in the field to the right.

 If you chose 

UserDefined, but leave the IP address set to 0.0.0.0, UserDefined 
changes to None after you click Apply.

 

If you set a second choice to 

UserDefined, and enter the same IP address, the second 
UserDefined changes to None after you click Apply.

 

Select DNS Relay to have the IAD act as a DNS proxy only when the 
ISP uses IPCP DNS server extensions.

 

The IAD's LAN IP address 

displays in the field to the right (read-only). The IAD tells the DHCP 
clients on the LAN that the IAD itself is the DNS server. When a 
computer on the LAN sends a DNS query to the IAD, the IAD forwards 
the query to the real DNS server learned through IPCP and relays the 
response back to the computer. 

You can only select DNS Relay for 

one of the three servers; if you select DNS Relay for a second or third 
DNS server, that choice changes to None after you click Apply.

 

Select None if you do not want to configure DNS servers. You must 
have another DHCP sever on your LAN, or else the computers must 
have their DNS server addresses manually configured. If you do not 
configure a DNS server, you must know the IP address of a computer 
in order to access it.

Apply

Click Apply to save your changes back to the IAD.

Cancel

Click Cancel to begin configuring this screen afresh.

Table 9   

LAN IP & DHCP (continued)

LABEL

DESCRIPTION

Содержание P-3202HN-Ba



























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды