ZyXEL Communications P-3202HN-Ba, Руководство пользователя

Страница: 212 / 250

Chapter 18 System
IAD User’s Guide
212
18.2 General Setup
Use this screen to configure the IAD’s system name, inactivity timer, and
password. Click Maintenance > System to open the General screen.
Figure 110 System > General Setup
The following table describes the labels in this screen.
Table 67 General Setup
LABEL DESCRIPTION
General Setup
System Name
Choose a descriptive name for identification purposes. It is
recommended you enter your computer’s “Computer name” in this field.
This name can be up to 30 alphanumeric characters long. Spaces are not
allowed, but dashes “-” and underscores "_" are accepted.
Administrator
Inactivity
Timer Type how many minutes a management session (either via the web
configurator or telnet) can be left idle before the session times out. The
default is 5 minutes. After it times out you have to log in with your
password again. Very long idle timeouts may have security risks. A value
of "0" means a management session never times out, no matter how
long it has been left idle (not recommended).
Password
Old Password
Type the default password or the existing password you use to access the
system in this field.
New Password Type your new system password (up to 30 characters). Note that as you
type a password, the screen displays a (*) for each character you type.
After you change the password, use the new password to access the IAD.
Retype to
Confirm Type the new password again for confirmation.
Apply Click Apply to save your changes back to the IAD.
Cancel Click Cancel to begin configuring this screen afresh.