manualshive.com logo in svg

ZyXEL Communications P-2812HNU-51c, Руководство пользователя

Поделиться
Скачать
ZyXEL Communications P-2812HNU-51c Скачать руководство пользователя страница 420

Appendix G Open Software Announcements

P-2812HNU-51c User’s Guide

420

1. Redistributions of source code must retain the above copyright notice, this list 
of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this 
list of conditions and the following disclaimer in the documentation and/or other 
materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must 
display the following acknowledgment: "This product includes software developed 
by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/
)"

4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to 
endorse or promote products derived from this software without prior written 
permission. For written permission, please contact [email protected].

5. Products derived from this software may not be called "OpenSSL" nor may 
"OpenSSL" appear in their names without prior written permission of the OpenSSL 
Project.

6. Redistributions of any form whatsoever must retain the following 
acknowledgment: "This product includes software developed by the OpenSSL 
Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY 
EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS 
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH 
DAMAGE.

This product includes cryptographic software written by Eric Young 
([email protected]).  This product includes software written by Tim Hudson 
([email protected]).

Original SSLeay License

Copyright (C) 1995-1998 Eric Young ([email protected]) 

Содержание P-2812HNU-51c


















































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды