ZyXEL Communications P-2812HNU-51c, Руководство пользователя

Страница: 331 / 433

Appendix A Network Troubleshooting
P-2812HNU-51c User’s Guide
331
and other route information. When your computer wants to access an IP address
on another network, it references this table.
Syntax:
route print
Parameters: For the purposes of this section, the
print
parameter is the most
important. If you enter
route
by itself, the command’s help page displays.
The following example shows the typical output of this command:
The following table describes labels shown in the command output:
C:\>route print
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x1000003 ...00 02 e3 a1 b2 c3 ...... Broadcom NetXtreme Gigabit Ethernet
Driver
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 172.16.1.254 172.16.1.32 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
172.16.1.0 255.255.255.0 172.16.1.32 172.16.1.32 1
172.16.1.32 255.255.255.255 127.0.0.1 127.0.0.1 1
172.16.255.255 255.255.255.255 172.16.1.32 172.16.1.32 1
224.0.0.0 224.0.0.0 172.16.1.32 172.16.1.32 1
255.255.255.255 255.255.255.255 172.16.1.32 172.16.1.32 1
Default Gateway: 172.16.1.254
===========================================================================
Persistent Routes:
None
Table 114 route print Command Output
OUTPUT DESCRIPTION
Active Routes This section lists all available routes that are automatically
learned from the network.
Network Destination The destination IP address of packets that this route entry is to
route. The destination can be an IP address for a network or host,
0.0.0.0 for the default route or 127.0.0.0 for the loopback
interface which is used mainly for self-test.
The destination 224.0.0.0 is for multicasting packets or reserved
for testing. But if you are not using multicast applications, just
ignore it.
The destination 255.255.255.255 is used to find computers when
an IP address is not known. For example, before the DHCP IP
address of your computer is determined, your computer sends
packets with the destination looking for DHCP servers on the
network.