ZyXEL Communications P-2304R, Руководство пользователя

Страница: 92 / 300

Chapter 7 LAN
P-2304R-P1 Series User’s Guide
92
Figure 43 Network > LAN > Static DHCP
Each field is described in the following table.
7.2.4 LAN Client List Screen
"
This screen is empty if the DHCP server is not enabled. You can enable it in
Network > LAN > DHCP Setup.
Use this screen to look at the IP addresses the ZyXEL Device has assigned to DHCP clients on
the LAN. To access this screen, click
Network > LAN > Client List .
Table 37 Network > LAN > Static DHCP
LABEL DESCRIPTION
# This field is a sequential value. It is not associated with a specific entry.
MAC Address Enter the MAC address of the computer to which you want the ZyXEL Device to
assign the same IP address.
IP Address Enter the IP address you want the ZyXEL Device to assign to the computer.
Apply Click this to save your changes and to apply them to the ZyXEL Device.
Reset Click this to set every field in this screen to its last-saved value.