ZyXEL Communications OMC-2301, Руководство пользователя

Страница: 93 / 224

OMC-2301 User’s Guide
93
C
H A P T E R
9
Priority Profile
This chapter describes how you can change packet priorities using the Priority Profile screen.
9.1 Priority Profile Overview
Quality of Service (QoS) refers to both a network’s ability to deliver data with minimum delay,
and the networking methods used to control the use of bandwidth. Without QoS, all traffic data
is equally likely to be dropped when the network is congested. This can cause a reduction in
network performance and make the network inadequate for time-critical application such as
video-on-demand.
To ensure QoS on packets between layer 2 (L2) and layer 3 (L3) networks, you can configure
a priority profile to map TOS (L3) precedence bits to the COS (L2) value. Each COS value is
then mapped to the physical queue you specify in the
EPON Common Setup screen. The
The OMC determines the COS value of a packet using one of the following methods:
• Using the IEEE 802.1p priority level in the VLAN tag.
• Using the port’s default priority setting.
• Mapping the TOS bits.
In addition to configuring TOS-COS mappings, you can do the following to ensure QoS on the
network using a priority profile:
• Group traffic based on the Ethernet type, VLAN group or protocol number. Then assign a
VLAN priority and queue to the classified traffic.
• Associate a priority profile to a service profile.
9.2 Configuring a Priority Profile
Click Advanced Application > Priority Profile to display the configuration screen. Use this
screen to change the precedence bits (TOS-COS mappings) and VLAN priority and assign
specified packets to queues. Once you have configured a priority profile, associate it to a
service profile to apply to an ONU.