ZyXEL Communications OMC-2301, Руководство пользователя

Страница: 180 / 224

Chapter 20 Command Examples
OMC-2301 User’s Guide
180
where
This command sends Ping packets to an Ethernet device. The following example sends Ping
requests to and displays the replies from an Ethernet device with an IP address of
172.23.37.120
.
20.5 traceroute
Syntax:
traceroute <ip|hostname> [out-of-band] [ttl <1-255>] [wait <1-60>] [queries
<1-10>]
where
This command displays information about the route to an Ethernet device. The following
example displays route information to an Ethernet device with an IP address of
192.168.1.100
.
20.6 epon-common Commands
This section shows you how to configure common EPON settings in configuration mode.
<ip|host-name>
= The IP address or host name of an Ethernet device.
[ size <0-1472> ]
= Specifies the packet size to send.
sysname# ping 172.23.37.120
Resolving 172.23.37.120... 172.23.37.120
sent rcvd rate rtt avg mdev max min reply from
1 1 100 0 0 0 0 0 172.23.37.120
2 2 100 10 1 3 10 0 172.23.37.120
3 3 100 10 2 5 10 0 172.23.37.120
sysname#
<ip|hostname> =
The IP address or hostname of an Ethernet device.
[out-of-band] =
Specifies the network interface to which the Ethernet device
belongs.
[ttl <1-255>] =
Specifies the Time To Live (TTL) period.
[wait <1-60>] =
Specifies the time period to wait.
[quesries <1-10>] =
Specifies how many tries the OMC performs the traceroute
function.
sysname> traceroute 192.168.0.100
traceroute to 192.168.0.100, 30 hops max, 40 byte packet
1:192.168.0.100 (10 ms) (10 ms) (0 ms)
traceroute done:
sysname>