ZyXEL Communications nwa series, Руководство пользователя

Страница: 98 / 333

Chapter 8 Monitor
NWA/WAC/WAX Series User’s Guide
98
The following table describes the labels in this screen.
8.7 Detected Device
Use this screen to view information about surrounding APs which you could mark as Rogue or Friendly.
Click
Monitor > Wireless > Detected Device to access this screen. Not all Zyxel Devices support monitor
mode (see Section 1.2 on page 14 ). For more information about Rogue APs, see Section 10.3 on page
124 .
Note: If the Zyxel Device supports monitor mode, the radio or at least one of the Zyxel
Device’s radio must be set to monitor mode (in the Wireless > AP Management screen)
in order to detect other wireless devices in its vicinity.
Note: If the Zyxel Device does not support monitor mode, turn on rogue AP detection in the
Configuration > Wireless > Rogue AP screen to detect other APs.
Table 36 Monitor > Wireless > WDS Link Info
LABEL DESCRIPTION
WDS Uplink Info
WDS Downlink
Info
Uplink refers to the WDS link from the repeaters to the root AP.
Downlink refers to the WDS link from the root AP to the repeaters.
When the Zyxel Device is in root AP mode and connected to a repeater, only the downlink
information is displayed.
When the Zyxel Device is in repeater mode and connected to a root AP directly or via another
repeater, the uplink information is displayed.
When the Zyxel Device is in repeater mode and connected to a root AP and other repeater(s),
both the uplink and downlink information would be displayed.
# This is the index number of the root AP or repeater in this list.
MAC Address This is the MAC address of the root AP or repeater to which the Zyxel Device is connected using
WDS.
Band This is the frequency band of the WiFi network to which the Zyxel Device is connected using
WDS.
Radio This is the radio number on the root AP or repeater to which the Zyxel Device is connected
using WDS.
SSID Name This indicates the name of the WiFi network to which the Zyxel Device is connected using WDS.
Security Mode This indicates which secure encryption methods is being used by the Zyxel Device to connect
to the root AP or repeater using WDS.
Signal Strength This is the RSSI (Received Signal Strength Indicator) of the wireless connection in WDS.
Tx Rate This is the maximum transmission rate of the root AP or repeater to which the Zyxel Device is
connected using WDS.
Rx Rate This is the maximum reception rate of the root AP or repeater to which the Zyxel Device is
connected using WDS.
Association Time This displays the time the Zyxel Device first associated with the wireless network using WDS.
Refresh Click this to refresh the items displayed on this page.