ZyXEL Communications nwa series, Руководство пользователя

Страница: 144 / 333

NWA/WAC/WAX Series User’s Guide
144
C
HAPTER
13
AP Profile
13.1 Overview
This chapter shows you how to configure preset profiles for the Zyxel Device.
13.1.1 What You Can Do in this Chapter
• The Radio screen ( Section 13.2 on page 147 ) creates radio configurations that can be used by the
APs.
• The SSID screen ( Section 13.3 on page 155 ) configures three different types of profiles for your
networked APs.
13.1.2 What You Need To Know
The following terms and concepts may help as you read this chapter.
Wireless Profiles
At the heart of all wireless AP configurations on the Zyxel Device are profiles. A profile represents a group
of saved settings that you can use across any number of connected APs. You can set up the following
wireless profile types:
• Radio - This profile type defines the properties of an AP’s radio transmitter. You can have a maximum
of 64 radio profiles on the Zyxel Device.
• SSID - This profile type defines the properties of a single WiFi network signal broadcast by an AP. Each
radio on a single AP can broadcast up to 8 SSIDs. You can have a maximum of 64 SSID profiles on the
Zyxel Device.
• Security - This profile type defines the security settings used by a single SSID. It controls the encryption
method required for a WiFi client to associate itself with the SSID. You can have a maximum of 64
security profiles on the Zyxel Device.
• MAC Filtering - This profile provides an additional layer of security for an SSID, allowing you to block
access or allow access to that SSID based on WiFi client MAC addresses. If a client’s MAC address is
on the list, then it is either allowed or denied, depending on how you set up the MAC Filter profile. You
can have a maximum of 64 MAC filtering profiles on the Zyxel Device.
• Layer-2 Isolation - This profile defines the MAC addresses of the devices that you want to allow the
associated WiFi clients to have access to when layer-2 isolation is enabled.
SSID
The SSID (Service Set IDentifier) is the name that identifies the Service Set with which a wireless station is
associated. Wireless stations associating to the access point (AP) must have the same SSID. In other
words, it is the name of the WiFi network that clients use to connect to it.