Chapter 10 Wireless
NWA/WAC/WAX Series User’s Guide
122
Enable WDS Wireless
Bridging
Not all models support this feature. See
for models that support
wireless bridge.
If you set the Zyxel Device as a root AP, the radio that’s bridging with the Zyxel Device
should be in repeater mode.
Be careful to avoid bridge loops. For example, if your root AP and the Zyxel Device are
connected to a switch, and they’re also connected to each other using a WiFi connection.
This will create bridge loops.
This field is available only when the radio is in
Repeater
mode. Select this to enable WDS
wireless bridging on the Zyxel Device
to establish wireless links with other APs.
See
for more information on Wireless Distribution System (WDS).
Note: You must enable the same WiFi security settings on the Zyxel Device and on
all WiFi clients that you want to associate with it.
Uplink Selection
Mode
This field is available only when the radio is in
Repeater
mode.
Select
AUTO
to have the Zyxel Device automatically use the settings in the applied WDS
profile to connect to a root AP or repeater.
Select
Manual
to have the Zyxel Device connect to the root AP or repeater with the MAC
address specified in the
Radio 1 Uplink MAC Address
field.
Setup Wireless Bridge
Vlan ID
This appears if you select
Enable WDS Wireless Bridging
.
Click this to show the
Wireless Bridge Vlan Setting
pop-up window. This link is available only
when the radio is in
Root AP
or
Repeater
mode.
Wireless Bridge Vlan Setting
Add
Click this to add an entry in the table.
Remove
Select an entry and click this to remove the selected entry.
#
This field is a sequential value. It is not associated with any VLAN ID.
Wireless Bridge
Vlan ID
Enter a VLAN ID for the wireless bridge. The VLAN IDs you set on your root AP should be the
same as the VLAN ID you set here. See
for more information on
wireless bridge.
OK
Click
OK
to save your changes back to the Zyxel Device.
Close
Click
Close
to close the pop-up window without saving your changes.
Max Output Power
Enter the maximum output power (between 0 to 30 dBm) of the Zyxel Device in this field. If
there is a high density of APs in an area, decrease the output power of the Zyxel Device to
reduce interference with other APs.
Note: Reducing the output power also reduces the Zyxel Device’s effective
broadcast radius.
MBSSID Settings
Add
This button is not available after you configure the Zyxel Device using the wizard.
Click the
Add
icon (
)to open a screen where you can create a new entry. For features
where the entry’s position in the numbered list is important (features where the Zyxel Device
applies the table’s entries in order like the SSID for example), you can select an entry and
click
Add
to create a new entry after the selected entry.
Edit Click
the
Edit
icon (
)to open a screen where you can modify the entry’s settings. In some
tables you can just click a table entry and edit it directly in the table. For those types of
tables small red triangles display for table entries with changes that you have not yet
applied.
#
This field shows the index number of the SSID
SSID Profile
This field displays the SSID profile that is associated with the radio profile.
Table 44 Configuration > Wireless > AP Management (continued)
LABEL
DESCRIPTION
Содержание nwa series
