ZyXEL Communications nwa series, Руководство пользователя

Страница: 213 / 333

Chapter 17 System
NWA/WAC/WAX Series User’s Guide
213
17.6.2 SSH Implementation on the Zyxel Device
Your Zyxel Device supports SSH versions 1 and 2 using RSA authentication and four encryption methods
(AES, 3DES, Archfour, and Blowfish). The SSH server is implemented on the Zyxel Device for management
using port 22 (by default).
17.6.3 Requirements for Using SSH
You must install an SSH client program on a client computer (Windows or Linux operating system) that is
used to connect to the Zyxel Device over SSH.
17.6.4 Configuring SSH
Click Configuration > System > SSH to open the following screen. Use this screen to configure your Zyxel
Device’s Secure Shell settings.
Note: It is recommended that you disable FTP when you configure SSH for secure
connections.
Figure 132 Configuration > System > SSH
The following table describes the labels in this screen.
Table 88 Configuration > System > SSH
LABEL DESCRIPTION
Enable Select the check box to allow or disallow the computer with the IP address that matches the IP
address(es) in the
Service Control table to access the Zyxel Device CLI using this service.
Note: The Zyxel Device uses only SSH version 2 protocol.
Server Port You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Server Certificate Select the certificate whose corresponding private key is to be used to identify the Zyxel Device
for SSH connections. You must have certificates already configured in the
My Certificates
screen.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.