ZyXEL Communications LTE7460-M608, Руководство пользователя

Страница: 77 / 124

Chapter 7 Networking
LTE7460-M608 User’s Guide
77
Figure 61 Networking > Remote Management
The following table describes the labels in this screen.
Note: In Bridge mode, this screen is referred to as Port Management , see Section 7.2 on page
54 to learn more about your LTE7460’s operating modes.
Table 29 Networking > Remote Management
LABEL DESCRIPTION
Remote Management
Secured Client IP Address A secured client is a “trusted” computer that is allowed to communicate with the
LTE7460-M608 using HTTPS, SSH or Telnet service.
Select All to allow any computer to access the LTE7460-M608 using HTTPS, SSH or
Telnet service.
Use the Selected (IP/Subnet) field to specify an IP address that will access the
LTE7460-M608 using HTTPS, SSH or Telnet service.
Remote Port Settings
https port Select the check box to enable the access to the LTE7460-M608 using HTTPS service.
Enter the service port number for accessing the LTE7460-M608 using this service.
SSH port Select the check box to enable the access to the LTE7460-M608 using SSH service.
Enter the service port number for accessing the LTE7460-M608 using this service.
Telnet port Select the check box to enable the access to the LTE7460-M608 using Telnet service.
Enter the service port number for accessing the LTE7460-M608 using this service.
Apply Click Apply to save your changes back to the LTE7460-M608.
Reset Click Reset to reload the previous configuration for this screen.