ZyXEL Communications LTE7460-M608, Руководство пользователя

Страница: 66 / 124

Chapter 7 Networking
LTE7460-M608 User’s Guide
66
Figure 50 Networking > Firewall > IPv6/Port Filter
The following table describes the labels in this screen.
Table 21 Networking > Firewall > IPv6/Port Filter
LABEL DESCRIPTION
IPv6/Port Filter
Enable IPv6/Port
Filter Select the check box to enable the rule.
IPv6/Port
Filtering Policy Select Whitelist to allow packets that match the filtering rules defined on this screen to pass
through. Select Blacklist to block packets that match the filtering rules defined on this screen.
IPv6/Port Filter List
Add New Click Add New to create a new rule.
This field displays the rule index number.
Source IP This field displays the source IPv6 addresses to which this rule applies.
Port This field displays a single port number of the source or a port range.
Enter the port number/range of the source that define the traffic type, for example TCP port 80
defines web traffic.
Protocol This field displays the protocol ( TCP , UDP , TCP+UDP or any ) used to transport the packets for
which you want to apply the rule. Select Any and all traffic from a Source IP and Destination IP is
filtered.
Dest. IP This field displays the destination IPv6 addresses to which this rule applies.
Port This field displays a single port number of the destination or a port range.
Enter the port number/range of the destination that define the traffic type, for example TCP port
80 defines web traffic.
Comment Enter descriptions of the rule in this field.
Action Click Edit to go to the screen where you can edit the filtering rule.
Click Delete to remove the filtering rule.
Apply Click Apply to save your changes back to the LTE7460-M608.
Reset Click Reset to reload the previous configuration for this screen.